Caché ObjectScript Reference
[Home] [Back] [Next]
InterSystems: The power behind what matters   

Contains the time zone offset from the Greenwich meridian.
$ZTIMEZONE can be used in two ways:
$ZTIMEZONE contains the time zone offset from the Greenwich meridian in minutes. (The Greenwich meridian includes all of Great Britain and Ireland.) This offset is expressed as a signed integer in the range -1440 to 1440. Time zones west of Greenwich are specified as positive numbers; time zones east of Greenwich are specified as negative numbers. (Time zones must be expressed in minutes, because not all time zone differences are in whole hours.) By default, $ZTIMEZONE is initialized to the time zone set for the computer’s operating system.
$ZTIMEZONE adjusts the local time by a fixed offset. It does not adjust for Daylight Saving Time or other local time variants. Caché takes its local time from the underlying operating system, which applies the local time variant for the location configured for that computer. Therefore, a local time adjusted using $ZTIMEZONE takes its local time variation from the configured locale, not the time zone specified in $ZTIMEZONE.
UTC time is calculated using a count of time zones from the Greenwich meridian ($ZTIMEZONE=0). It is not the same as local Greenwich time. The term Greenwich Mean Time (GMT) may be confusing; local time at Greenwich is the same as UTC during the winter; during the summer it differs from UTC by one hour. This is because a local time variant, known as British Summer Time, is applied.
For functions and programs that use $ZTIMEZONE, elapsed local time is always continuous, but the time value may need to be seasonally adjusted to correspond to local clock time. For more details on local seasonal time variants, refer to $HOROLOG.
Setting the Time Zone
You can use $ZTIMEZONE to set the time zone used by the current Caché process. Setting $ZTIMEZONE does not change the default Caché time zone or your computer’s time zone setting.
Changing the $ZTIMEZONE special variable is a feature designed for some special situations. Changing $ZTIMEZONE is not a consistent way to change the time zone that Caché uses for local date/time operations. The $ZTIMEZONE special variable should not be changed except by those programs that are prepared to handle all the inconsistencies that result.
On some platforms there may be a better way to change time zones than changing the $ZTIMEZONE special variable. If the platform has a process-specific time zone setting (for example, the TZ environment variable on POSIX systems) then making an external system call to change the process-specific time zone may work better than changing $ZTIMEZONE. Changing the process-specific time zone at the operating system level will change both the local time offset from UTC and apply the corresponding algorithm that determines when local time variants are applied. This is especially important if the default system time zone is in the Northern Hemisphere, while the desired process time zone is in the Southern Hemisphere. Changing $ZTIMEZONE changes the local time to a new time zone offset from UTC, but the algorithm that determines when local time variants are applied remains unchanged.
Use the SET command to set $ZTIMEZONE to a specified signed integer number of minutes. Leading zeros and decimal portions of numbers are ignored. If you specify a nonnumeric value or no value when setting $ZTIMEZONE, Caché sets $ZTIMEZONE to 0 (Greenwich meridian).
For example, North American Eastern Standard Time (EST) is five hours west of Greenwich. Therefore, to set the current Caché process to EST you would specify 300 minutes. To specify a time zone one hour east of Greenwich, you would specify –60 minutes. To specify Greenwich itself, you would specify 0 minutes.
The following anomalies occur after changing $ZTIMEZONE:
Other Time Zone Methods
You can obtain the same time zone information by invoking the TimeZone() class method, as follows:
Refer to the %SYSTEM.SYS class in the InterSystems Class Reference for further details.
You can return your local time variation as part of a date and time string by using the $ZDATETIME and $ZDATETIMEH functions with tformat values 5 or 6, as shown in the following example:
This returns a value such as:
The last part of this string (-04:00) indicates the system’s local time variation setting as an offset in hours and minutes from the Greenwich meridian. Note that this variation is not necessarily the time zone offset. In the above case, the time zone is 5 hours west of Greenwich (-5:00), but the local time variant (Daylight Saving Time) offsets the time zone time by one hour to -04:00. Setting $ZTIMEZONE changes the current process date and time returned by $ZDATETIME($HOROLOG,1,5), but does not change the system local time variation setting.
$ZDATETIMEH Uses Time Zone Setting
You can use $ZDATETIMEH with dformat=-3 to convert a Coordinated Universal Time (UTC) date and time value to a local time. This function takes as input a UTC value ($ZTIMESTAMP). It uses the local time zone setting to return the corresponding date and time with local time variants (such as Daylight Saving Time) applied where applicable.
   SET clock=$HOROLOG
   WRITE !,"local/local date and time: ",$ZDATETIME(clock,1,1,2)
   WRITE !,"UTC/local date and time:   ",$ZDATETIME(stamp,1,1,2)
Local/UTC Conversion Methods Using $ZTIMEZONE
Two class methods of the %SYSTEM.Util class convert between local date and time and UTC date and time: UTCtoLocalWithZTIMEZONE() and LocalWithZTIMEZONEtoUTC(). These methods are affected by changes to $ZTIMEZONE.
The following example returns your current time zone:
   IF zone=0 {
     WRITE !,"Your time zone is Greenwich Mean Time" }
   ELSEIF zone>0 {
     WRITE !,"Your time zone is ",zone/60," hours west of Greenwich" }
   ELSE {
     WRITE !,"Your time zone is ",(-zone)/60," hours east of Greenwich" }
The following example shows that setting the time zone can change the date as well as the time:
   SET zonesave=$ZTIMEZONE
   WRITE !,"Date in my current time zone:  ",$ZDATE($HOROLOG)
     SET $ZTIMEZONE=720 }
   ELSE {
   WRITE !,"Date halfway around the world: ",$ZDATE($HOROLOG)
   WRITE !,"Date at Greenwich Observatory: ",$ZDATE($ZTIMESTAMP)
   SET $ZTIMEZONE=zonesave
The following example determines if your local time is the same as your time zone time:
   SET localnow=$HOROLOG, stamp=$ZTIMESTAMP
   WRITE !,"local date and time: ",$ZDATETIME(localnow,1,1)
   SET clocksecs=$PIECE(localnow,",",2)
   SET stampsecs=$EXTRACT(stamp,7,11)-($ZTIMEZONE*60)
   IF clocksecs=stampsecs {
      WRITE !,"No local time variant:" 
      WRITE !,"Local time is timezone time" }
   ELSE {
         IF clocksecs=stampsecs+3600 {
           WRITE !,"Daylight Saving Time variant:"
           WRITE !,"Local time offset 1 hour from timezone time" }
         ELSE { WRITE !,"Local time and time zone time are "
                WRITE !,(clocksecs-stampsecs)/60," minutes different" }
See Also

Send us comments on this page
Copyright © 1997-2019 InterSystems Corporation, Cambridge, MA